PROUD OF THE PAST
PROJECTED TOWARDS THE FUTURE
The waterproofing membranes of the CENTRO series are obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer, and of a non-woven polyester reinforcement with dimensional stability controlled with longitudinally positioned mineral fibres, placed in the thickness of the membrane.
Perforated membrane for connecting layers for waterproofing semi-adhesive systems, made of polymer-bitumen with reinforced fibreglass reinforcement. It has upper and lower surfaces protected by the TERMOTENE film in non-stick function.
Bitumen-polymer elastomer waterproofing membranes (SBS). The specific formulation of the bitumen-polymer elastomer compound guarantees good mechanical performance, flexibility at
low temperatures (-25 °C), resistance to fatigue and breakage elongation of the compound above 2000%.
PARAGUM ST prefabricated waterproofing membranes are obtained by coextrusion of a compound, based on elastoplastomeric bitumen-polymer with base of metallocene resins, derived from the special PARALLOY component (widely known for its superior technical and performance characteristics), and a composite reinforcement in nonwoven polyester with a continuous filament stabilised with glass fibres, inserted in the thickness of the membrane in complete synergy with the same.
PARALON COLD waterproofing membranes are manufactured by coextrusion of a particular compound with exclusive PARALLOY derivation formulation, based on metallocene resins with selected molecular weight dispersed in bitumen, and of a composite reinforcement (consisting of high performance “non-woven” continuous filament polyester, coupled to a reinforcement layer in glass fibres, with high dimensional stability).
Latest-generation bitumen-polymer membranes for waterproofing that requires particular performance and durability qualities. They are produced with the use of the innovative PARALLOY EVO compound (evolution of the traditional Paralloy compound) consisting of special heterophasic copolymers dispersed in distilled bitumen, obtained by synthesis of a rubberelastomeric phase in a homopolymer matrix of metallocene resins with selected molecular weight.
Membrane prefabbricate ottenute per coestrusione
del compound PARALLOY® a base di resine metalloceniche con peso molecolare selezionato disperse in bitume, e di un’armatura in
“non tessuto” di poliestere da filo continuo, a stabilità dimensionale controllata con fibre minerali posizionate longitudinalmente
Prefabricated waterproofing membranes, obtained by coextrusion of the PARALLOY® compound based on metallocene resins with selected molecular weight dispersed in bitumen, suitably mixed with special non-toxic apyrogenic substances, and with a “non-woven” polyester reinforcement from a continuous filament with controlled dimensional stability with longitudinally positioned mineral fibres.
The PARALON PLUS MS prefabricated membrane is produced by coextrusion of a reinforcement in non-woven polyester fabric with
a continuous filament stabilised with mineral fibres and the innovative PARALLOY® compound, based on metallocene resins with
selected molecular weight dispersed in bitumen, stratified on the lower side to give the finished product outstanding characteristics
of adhesiveness on the laying surface and rapidity of execution in the creation of the sealed joints.
The prefabricated waterproofing membranes of the SINTOGUM series are obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer and a “non-woven” polyester reinforcement stabilised for the SINTOGUM PE and PE/ARD versions, or in reinforced glass mat for the SINTOGUM W. versions.
Prefabricated waterproofing membranes obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer and of a non-woven polyester reinforcement with a continuous filament placed in the thickness of the membrane in complete synergy with the same.
The SINTOPLENE 3 AV waterproofing membrane is obtained by coextrusion of an elastoplastomeric bitumenpolymer compound with a softening point at 150°C (ASTM D36) and of a reinforcement of a non-woven polyester reinforcement from a continuous filament weighing 120 g/m2 placed in the thickness of the membrane, in complete synergy with the same.
The STAR prefabricated waterproofing membranes are obtained by coextrusion of a bituminous dispersion of micro-compatibilisers
in a matrix of elastofin polymers and of a non-woven polyester reinforcement with dimensional stability controlled with longitudinally positioned mineral fibres, placed in the thickness of the membrane.
The self-adhesive pre-fabricated waterproofing membranes of the STICKER series are obtained from the layered coextrusion of special compounds based on selected bitumens modified with elastic-thermoplastic polymers, and a non-woven reinforcement
of stabilised composite polyester; the reinforcement is placed in the thickness of the membrane, in complete synergy with the waterproofing mass.
Bitumen-polymer elastomer waterproofing membranes (SBS). The specific formulation of the bitumen-polymer elastomer compound guarantees good mechanical performance, flexibility at low temperatures (-20°C), resistance to fatigue and breakage elongation of the compound above 1000%.
The prefabricated membranes of the TOP series are obtained by coextrusion of an elastoplastomeric bitumen-polymer blend. The precise formulation and the particular dispersion of distilled bitumens and polymers determine good mechanical performance and ageing.
