PROUD OF THE PAST
PROJECTED TOWARDS THE FUTURE
The waterproofing membranes of the CENTRO series are obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer, and of a non-woven polyester reinforcement with dimensional stability controlled with longitudinally positioned mineral fibres, placed in the thickness of the membrane.
Bitumen-polymer elastomer waterproofing membranes (SBS). The specific formulation of the bitumen-polymer elastomer compound guarantees good mechanical performance, flexibility at
low temperatures (-25 °C), resistance to fatigue and breakage elongation of the compound above 2000%.
PARAGUM ST prefabricated waterproofing membranes are obtained by coextrusion of a compound, based on elastoplastomeric bitumen-polymer with base of metallocene resins, derived from the special PARALLOY component (widely known for its superior technical and performance characteristics), and a composite reinforcement in nonwoven polyester with a continuous filament stabilised with glass fibres, inserted in the thickness of the membrane in complete synergy with the same.
PARALON ANTIRADICE is obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer, suitably mixed
with special chemical substances (fatty acids, phenoxics, esterifiers), which give the product a long-lasting Root-resistant effect, and
a non-woven polyester reinforcement with continuous filament, inserted in the thickness of the membrane in complete synergy with
the same.
Latest-generation bitumen-polymer membranes for waterproofing that requires particular performance and durability qualities. They are produced with the use of the innovative PARALLOY EVO compound (evolution of the traditional Paralloy compound) consisting of special heterophasic copolymers dispersed in distilled bitumen, obtained by synthesis of a rubberelastomeric phase in a homopolymer matrix of metallocene resins with selected molecular weight.
Membrane prefabbricate ottenute per coestrusione
del compound PARALLOY® a base di resine metalloceniche con peso molecolare selezionato disperse in bitume, e di un’armatura in
“non tessuto” di poliestere da filo continuo, a stabilità dimensionale controllata con fibre minerali posizionate longitudinalmente
Prefabricated membrane, with specific characteristics of resistance and impermeability to RADON gas. SICURBAR is obtained by coextrusion of a special bitumen-polymer- and plastomeric-based compound, strongly resistant to the passage of Radon and of a glass mat reinforcement coupled with a pure aluminium sheet that ensures the absolute impenetrability of Radon.
The prefabricated waterproofing membranes of the SINTOGUM series are obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer and a “non-woven” polyester reinforcement stabilised for the SINTOGUM PE and PE/ARD versions, or in reinforced glass mat for the SINTOGUM W. versions.
Prefabricated waterproofing membranes obtained by coextrusion of a compound based on elastoplastomeric bitumen-polymer and of a non-woven polyester reinforcement with a continuous filament placed in the thickness of the membrane in complete synergy with the same.
The SINTOPLENE 3 AV waterproofing membrane is obtained by coextrusion of an elastoplastomeric bitumenpolymer compound with a softening point at 150°C (ASTM D36) and of a reinforcement of a non-woven polyester reinforcement from a continuous filament weighing 120 g/m2 placed in the thickness of the membrane, in complete synergy with the same.
The STAR prefabricated waterproofing membranes are obtained by coextrusion of a bituminous dispersion of micro-compatibilisers
in a matrix of elastofin polymers and of a non-woven polyester reinforcement with dimensional stability controlled with longitudinally positioned mineral fibres, placed in the thickness of the membrane.
The self-adhesive pre-fabricated waterproofing membranes of the STICKER series are obtained from the layered coextrusion of special compounds based on selected bitumens modified with elastic-thermoplastic polymers, and a non-woven reinforcement
of stabilised composite polyester; the reinforcement is placed in the thickness of the membrane, in complete synergy with the waterproofing mass.
Bitumen-polymer elastomer waterproofing membranes (SBS). The specific formulation of the bitumen-polymer elastomer compound guarantees good mechanical performance, flexibility at low temperatures (-20°C), resistance to fatigue and breakage elongation of the compound above 1000%.
The prefabricated membranes of the TOP series are obtained by coextrusion of an elastoplastomeric bitumen-polymer blend. The precise formulation and the particular dispersion of distilled bitumens and polymers determine good mechanical performance and ageing.
The prefabricated membranes of the UNOSINT series are obtained by coextrusion of a compound based onelastoplastomeric bitumen-polymer and of a non-woven polyester continuous filament placed in the thickness of the membrane, in complete synergy with the same.
The UNOSINT 4/25 AV and 5/25 AV prefabricated waterproofing membranes are obtained by coextrusion of an elastoplastomeric bitumen-polymer compound with a softening point of ≥ 150°C and of a non-woven polyester reinforcement of continuous filament weighing ≥ 250 g/m2 placed in the thickness of the membranes, in complete synergy with the same.
